Leitarorð - Sandpappir

Slípibelti frá PFERD
Stærð (L x B): 2000 x 150 mm
Gerð: Z60

For coarse grinding work with a high stock removal rate and a long tool life.
Long belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Slípibelti frá PFERD
Stærð (L x B): 2000 x 150 mm
Gerð: Z80

For coarse grinding work with a high stock removal rate and a long tool life.
Long belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Slípibelti frá PFERD
Stærð (L x B): 2000 x 75 mm
Grófleiki: CO-COOL120

Ceramic oxide grain abrasive belt BA 75x2000mm CO-COOL120 for grinding stainless steel with a belt grinder.

Slípibelti frá PFERD
Stærð (L x B): 2000 x 75 mm
Gerð: CO-COOL60

For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
Long belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Slípibelti frá PFERD
Stærð (L x B): 2000 x 75 mm
Grófleiki: CO-COOL80

Ceramic oxide grain abrasive belt BA 75x2000mm CO-COOL80 for grinding stainless steel with a belt grinder.

Slipibelti frá PFERD
Stærð (L x B): 2000 x 75 mm
Gerð: Z40

Zirkon abrasive belt BA 75x2000mm Z40 for high stock removal with a belt grinder.

Slípibelti frá PFERD
Stærð (L x B): 2000 x 75 mm
Gerð: Z60

Zirkon abrasive belt BA 75x2000mm Z60 for high stock removal with a belt grinder.

Stærð (B x L): 13 x 447 mm
Gerð: A40

Stærð (B x L): 13 x 447 mm
Gerð: A80

Stærð (B x L): 13 x 447 mm
Gerð: A60

Slipibelti frá PFERD
Stærð (L x B): 520 x 20 mm
Gerð: Z40

For coarse grinding work with a high stock removal rate and a long tool life.
Short belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Slípibelti frá PFERD
Stærð (L x B): 520 x 20 mm
Gerð: Z60

For coarse grinding work with a high stock removal rate and a long tool life.
Short belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Slípibelti frá PFERD
Stærð (L x B): 520 x 20 mm
Gerð: Z80

For coarse grinding work with a high stock removal rate and a long tool life.
Long belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Slípibelti frá PFERD
Stærð (L x B): 533 x 30 mm
Gerð: A180

For general applications from coarse to fine grinding.
Short belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Slípibelti frá PFERD
Stærð (L x B): 533 x 30 mm
Gerð: A240

For general applications from coarse to fine grinding.
Short belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Slípibelti frá PFERD
Stærð (L x B): 533 x 30 mm
Gerð: A320

For general applications from coarse to fine grinding.
Short belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Slípibelti frá PFERD
Stærð (L x B): 533 x 30 mm
Gerð: A60

For general applications from coarse to fine grinding.
Short belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Slípibelti frá PFERD
Stærð (L x B): 533 x 30 mm
Gerð: A80

For general applications from coarse to fine grinding.
Short belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Slípibelti frá PFERD
Stærð (L x B): 533 x 75 mm
Gerð: A80

For general applications from coarse to fine grinding.
Short belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".