Pferd

Flókakefli POLINOX PNL frá PFERD
Þvermál: 100 mm
Breidd: 100 mm
Gatstærð: 19 mn
Gerð: A100

POLINOX non-woven grinding drum PNL dia. 100 x 100 mm keyway 19 mm A100 for fine grinding and finishing.

Flókakefli POLINOX PNL frá PFERD
Þvermál: 100 mm
Breidd: 100 mm
Gatstærð: 19 mn
Gerð: A180

POLINOX non-woven grinding drum PNL dia. 100 x 100 mm keyway 19 mm A100 for fine grinding and finishing.

Flókaskífa COMBIDISC frá PFERD með CD/CDR hraðlás
Þvermál: 50 mm
Grófleiki: A100G

COMBIDISC hard non-woven disc CDR dia. 50 mm A100G for fine grinding and finishing.

Suitable for general work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation and light deburring work. Achieve matt and satin-finished surfaces.

POLIVLIES grit size 100 G = coarse (yellow-brown)

The CDR clamping system has a threaded connection with male thread (plastic) on the tool side. Also suitable for the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.

Flókaskífa COMBIDISC frá PFERD með CD/CDR hraðlás
Þvermál: 75 mm
Grófleiki: A100G

COMBIDISC hard non-woven disc CDR dia. 75 mm A100G for fine grinding and finishing.

Suitable for general work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation and light deburring work. Achieve matt and satin-finished surfaces.

POLIVLIES grit size 100 G = coarse (yellow-brown)

The CDR clamping system has a threaded connection with male thread (plastic) on the tool side. Also suitable for the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.

Flókaskífa COMBIDISC frá PFERD með CD/CDR hraðlás
Þvermál: 50 mm
Grófleiki: A180M

COMBIDISC hard non-woven disc CDR dia. 50 mm A180M for fine grinding and finishing.

Suitable for general work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation and light deburring work. Achieve matt and satin-finished surfaces.

POLIVLIES grit size 180 M = medium (red-brown)

The CDR clamping system has a threaded connection with male thread (plastic) on the tool side. Also suitable for the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.

Flókaskífa COMBIDISC frá PFERD með CD/CDR hraðlás
Þvermál: 75 mm
Grófleiki: A180M

Suitable for general work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation and light deburring work. Achieve matt and satin-finished surfaces.

POLIVLIES grit size 180 M = medium (red-brown)

The CDR clamping system has a threaded connection with male thread (plastic) on the tool side. Also suitable for the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.

Flókaskífa COMBIDISC frá PFERD með CD/CDR hraðlás
Þvermál: 75 mm
Grófleiki: A240F

COMBIDISC hard non-woven disc CDR dia. 75 mm A240F for fine grinding and finishing.

Suitable for general work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation and light deburring work. Achieve matt and satin-finished surfaces.

POLIVLIES grit size 240 F = fine (blue)

The CDR clamping system has a threaded connection with male thread (plastic) on the tool side. Also suitable for the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.

Flókaskífa PVKR A100G 125mm frá PFERD
Þvermál: 125 mm
Gerð: A100G

POLIVLIES self-adhesive disc PVKR aluminium oxide dia. 125 mm A100G for fine grinding and finishing with an angle grinder.

POLIVLIES self-adhesive disc and the associated POLIVLIES self-adhesive disc holder also enables use on contours. The pre-punched holes mean that they can be ideally centred on and used with various backing pads.

They are especially well-suited to work on large stainless steel (INOX) surfaces.

Flókaskífa PVKR A180M 125mm frá PFERD
Þvermál: 125 mm
Gerð: A180M

POLIVLIES self-adhesive disc PVKR aluminium oxide dia. 125 mm A180M for fine grinding and finishing with an angle grinder.

POLIVLIES self-adhesive disc and the associated POLIVLIES self-adhesive disc holder also enables use on contours. The pre-punched holes mean that they can be ideally centred on and used with various backing pads.

They are especially well-suited to work on large stainless steel (INOX) surfaces.

POLIVLIES grit size 180 M = medium (red-brown)

Flókaskífa PVKR A240F 125mm frá PFERD
Þvermál: 125 mm
Gerð: A240F

POLIVLIES self-adhesive disc PVKR aluminum oxide dia. 125 mm A240F for fine grinding and finishing with an angle grinder.

POLIVLIES self-adhesive disc and the associated POLIVLIES self-adhesive disc holder also enables use on contours. The pre-punched holes mean that they can be ideally centred on and used with various backing pads.

They are especially well-suited to work on large stainless steel (INOX) surfaces.

POLIVLIES grit size 240 F = fine (blue)